|
Cross
Transport Modules for pcbs
The
cross-transport module diverts pcbs from a line and transports them
to the right or to the left
side.
There are three
models for this basic function:
XT 100, XTP 200, US 1/90°
1.) Type XT
100
 |
The transport direction is
changed by 90° -pcbs leave the line and enter a new line
for operation. |
Below the
transport belts are the transport rollers.
After the choice of the requested direction the transport rollers
are raised through the transport belts and take the pcbs
from the belt to bring them into the right or left direction. After pcbs
have left, the rollers return to their initial position.
Though pcbs are
removed from the line. However the position of the pcb on the
belt is
changed, means the former leading edge is no longer in front in the
new direction.
2.) Type XTP
200
This model has
the same diverting function + buffering and centering
function.
Buffering:
Temporary take-off of max. 15 pcbs from the line and interim
storage. Fork type metal carriers take the pcbs
from the transport level and lift them upwards. On demand the buffered pcbs
are refed to the line working as LiFo: „last in – first
out".
Centering: An
automatic pcb measurement allows the gentle centering of the
pcbs. Differing
sizes are identified on this point and adjusted, if
necessary.
3.) Type US
1/90°
 |
This model is a diverter as well, but
transports the pcbs by a swivel carrier. The pcbs are turned by
this carrier in the new direction. After beeing turned the
leading edge of pcb is still in front. |
The swivel
carrier is underneath the transport belts.
If the pcb should be turned to the right or to the left side, the
swivel carrier raises through the transport belts, section 1, and
takes the pcb. Now the pcb lies on the metal bars of the swivel
carrier above the transport level. The carrier turns the pcb,
lowers it and put it down on the transport belt, section
2.
Now the pcb
runs in the new direction. The swivel carrier remains beneath the
transport level and returns to its initial position.
Advantages:
•
Room saving
• Corner station or distributor in the
line
• Infinitely adjustable drive for all
transport levels
• Easy operation
• Connection of two different
lines
US 1/90°
Specification:
Basic frame:
Panelling:
Max. pcb-size:
Min. pcb-size:
Transport speed:
Control:
Connection load:
Compressed air connection:
External dimensions:
Working height :
Weight : |
Steel, powder coated
Steel sheets powder coated
625 x 625 mm
350 x 350 mm
Max. 9 m/min.
Siemens
PLC S7 200 with text display
0.3 KW
Min. 5 bar
2,000 mm (l) x 1,000 mm (b) x 1,250 mm (h)
950 ± 50 mm
110 kg |
• Download this page as zipped pdf-
file
• Download US
1/90°- infos, too
Get infos
on our products:
Coating- LG 250, VCR100
Drying- (horizontally) HET 120, IR/16 KW, ABL 30,
(vertically) VDH 248, MD4000
Handling- Horizontal Loader HS, Vertical Loader VS, Transport Modules XT/US1/XTP, TVA Separators, TA
Automatic Separators, SV100 Plane Raze
Device
|
