|
Versatile Dryer fits into every PCB production
The Magazine Dryer is very easy to operate –
install and operate!
Different sizes
of PCBs can be loaded into the magazines, e.g. at the screen
printer or at the developer, and are brought to the dryer by
transport carriages. The magazine can be pushed into the dryer and
taken off at the outfeed. It runs above rolls in cycles through the
dryer. The sizes of magazines depend from the sizes of
PCBs.
Choosing the
program button can activate the requested application. The 4 stored
programs can be selected by pressing the respective button. The
selected program is displayed.
The single
steps of drying are loading, heating on, holding of temperature,
cooling down, unloading. The loading and unloading area is
accessible by glass doors. The sight windows allow the visual
control.
Features:
• Easy
operation and installation
• Very different PCB sizes and shapes are possible
• Changeable magazine sizes
• Big PCBs up to 760 x 760 mm, 30" x 30", can be run
• Compact Dryer with small dimensions
• Special design of magazines for unusual pcb sizes and
shapes
The
applications:
| 1. Drying following screen printing (solder
mask) |
|
| Approx. 20 min., 70 – 90°C, 160 –200°
F |
Approx. 100 pcbs/h |
| 2.
Drying after "Hole plugging" |
|
| Approx. 30 min., 145°C, 290° F |
Approx. 80 pcbs/h |
| 3. Drying after legend print |
|
| Approx. 20 min., 145°C, 290° F |
Approx. 100 pcbs/h |
| 4. Thermal bump |
|
| Approx. 10 min., 110-120°C, 250° F |
Approx.
140 pcbs/h |
| 5. Thermal curing |
|
| Approx. 60 min., 150°C, 300° F |
Approx. 45 pcbs/h |
| 6. Tempering of base material |
|
| Approx. 30 min., 135°C, 275° F |
Approx. 80 pcbs/h |
Technical
data:
| Pcb sizes: |
Up to max. 760 x 760 mm, 30"
x 30" |
| Pcb-thickness: |
0.2 – 15 mm, 8 –
600 mil’s |
| Dimensions: |
4,570 (l) x 2,280 (h) x 1,980
(b) mm
180" (l) x 90" (h) x 78" (w) |
| Electrical load : |
3 x 400 V, N, PE 45
KW |
| Exhaust air: |
Max. 2,000 m3/h,
1,200 CFM |
| Chilled water: |
4 bar, max. 1.000 l/h,
approx. 10°C
60 PSI, max. 280 gallons/h, approx. 50°F |
| Compressed air:
|
6 bar, 90 PSI |
• Download this page as zipped pdf-
file
Get infos
on our products:
Coating- LG 250, VCR100
Drying- (horizontally) HET 120, IR/16 KW, ABL 30,
(vertically) VDH 248, MD4000
Handling- Horizontal Loader HS, Vertical Loader VS, Transport Modules XT/US1/XTP, TVA Separators, TA
Automatic Separators, SV100 Plane Raze
Device
|
