|
Filling of through holes in
pcb´s
This Hand
tool is designed for filling of through holes in Printed Circuit
Boards.
Function:
The paste is stored inside this tool and is pressed through the
holes of the PCB’s with compressed air, which is controlled by a
foot switch. You simply control the compressed air as you
slowly fill the holes. This is a “one step” process and
there is no risk of getting air bubbles inside the holes. When you
are finished, the Power Squeegee PS 100 is stored in the
refrigerator.
The inks for this process
are:
- Silver Paste
(Conductive)
- Copper Paste
(Conductive)
- Epoxy Fill (Non-conductived)
System Data:
| Length: |
approx.
4.3” |
| Diameter: |
2.56” |
| Weight: |
approx.
2.5 lbs (including Paste) |
| Paste
Capacity: |
200g
( Silver Paste) |
| Material: |
Stainless
Steel |
Advantages:
- Partial Plugging of Holes
- No more waste from the very valuable Silver Paste
- No clean up
or change from the paste to storage containers
- Using of up
to 100 lbs pressure to push the paste through very high aspect
ratio (1:30) boards
- No direct
contact between the compressed air and the paste
The result:
Surfaces ground with Plane Raze
Device SV 100
• Download
this page as zipped pdf- file Get infos on
our products:
Coating- LG 250, VCR100
Drying- (horizontally) HET 120, IR/16
KW, ABL 30, (vertically) VDH
248, MD4000
Handling- Horizontal Loader HS, Vertical
Loader VS, Transport Modules
XT/US1/XTP, TVA Separators, TA
Automatic Separators, Vacuum Plugging VCP,
Plane Raze
Device SV 100 |
