|
| No.
of heating circuits: |
4 |
| Capacity: |
248
pcbs
2.5 – 3 pcbs per min., depends on the requested hold-on-time
|
| |
min. |
max. |
Pcb
size:
Pcb thickness: |
300 x 350 mm
0.3 mm |
610 x 610 mm
4.2 mm |
Heating
length:
Cooling length:
Connection load:
Continuous load: |
7.20 m
1.20 m
112 KW
62 KW
|
|
|
|
|
|
Length |
Height |
Width |
| Dimensions: |
12.04
m |
2.55
m |
2
m |
| Incl.
in- and outfeed: |
13.54
m |
|
|
| Painting: |
RAL 7035 light- gray |
|
| Frame: |
IC 198
blue
|
|
|
A) Function:
The pcb runs
in automatically and is centered.
The grippers of the loading arm take the pcb on its upper edge (6
mm). The pcb is hold
by the grippers. The loading arm moves upwards to hang the pcb
into the clamps
of the dryer. Whilst hanging, the pcb passes the drying process
consisting of 4
heating zones and a separate cooling zone. On the outfeed the
second loading arm
moves upwards to take the pcbs off the clamps and put them on the
outfeed belt. |
| B)
Temperature: |
|
Tack
drying |
Thermal
Cure |
| Ramp
up: |
12
Min. |
15
Min. |
| Hold
on: |
25
Min. |
60
Min. approx. 150 pcbs/hour |
| Cool
down: |
12
Min. |
15
Min. |
The dryer has four heating zones.
When leaving the heating zones the temperature on the pcb is about
150°C (thermal cure)
After leaving the temperature goes down. The pcb is being supplied
with hot air
to prevent condensation. The pcb passes the cooling zone. The
temperature on the
pcb is slowly run down such as to make the pcb leaving the dryer
at about 30°C.
C) Advantages:
• No
subject to the pcb size
• Special
clamp for thin pcb material 0.1-2.4 mm
• Excellent
temperature distribution on pcb
• No
condensation
• Visualization
of process on pc
• Temperature
control of each zone on both sides
• No
buckling or distortions
• Extendable
at any time
D) Options/
Alternatives:
1.
Double-track drying allows pcbs to be dried side by side
2. Shuttle
dryer – with additional infeed for screen printing pcbs
Types of vertical
dryers/ Specifications:
| Type |
Holding
time |
Duration |
Capacity
pcb/min. |
Dryer
length |
Heating
length |
Total
length |
No.
of heating zones |
Connection/
continuous load kW |
VDH
144
PDF here |
45 min.
60 min. |
102 min.
120 min. |
1.4
1.2 |
8080
mm |
3275
mm |
9580
mm |
2 |
68/38 |
VDH
196
PDF here |
45 min.
60 min. |
85 min.
106 min. |
2.3
1.85 |
10060
mm |
5255
mm |
11560
mm |
3 |
92/50 |
VDH
248
(PDF: See below) |
45 min.
60 min. |
78 min.
100 min. |
3.15
2.5 |
12040
mm |
7235
mm |
13540
mm |
4 |
112/62 |
VDH
300
PDF here |
45 min.
60 min. |
75 min.
94 min. |
4.0
3.2 |
14020
mm |
9215
mm |
15520
mm |
5 |
130/72 |
VDH
352
PDF here |
45 min.
60 min. |
72 min.
90 min |
4.9
3.9 |
16000
mm |
11195
mm |
17500
mm |
6 |
150/83 |
| |
|
• Download
this page as zipped pdf- file
Get infos on
our products:
Coating- LG 250, VCR100
Drying- (horizontally) HET 120, IR/16
KW, ABL 30, (vertically) VDH
248, MD4000
Handling- Horizontal Loader HS, Vertical
Loader VS, Transport Modules
XT/US1/XTP, TVA Separators, TA
Automatic Separators, SV100 Plane Raze Device |
